Technology
Bosetech brings you the technology for your unique application. We believe in understanding the customer’s needs and providing a custom fit solution. When it comes to solving problems, our flexible approach ensures that your requirements will be met.
-
Bare tubes are typically used in shell & tube heat exchangers. They can withstand high pressure and high temperature applications.
Bare tubes are also used in evaporative fluid coolers. This type of cooler cools process fluid close to the wet bulb temperature.
-
Fins extend the surface area of a tube. This increases the heat transfer rate, resulting in higher efficiency. Fin tube exchangers are used with liquid on the tube side and gas on the fin side.
On Exhaust Gas Recovery applications, the gas temperatures can reach up to 850C.
Air coolers operate with ambient air as the cooling source.
Heat Transfer
-
Static filters come in Simplex and Duplex forms, with various types of closures. They can be cast or welded. Cast filters are primarily used in filtration of water, oil and fuels and available directly from stock. Welded simplex filters were developed for liquid, gaseous and low-viscosity media and can be designed for a pressure of up to 64 bar.
-
During normal filtration, particles accumulate from top to bottom on the inside of the strainer. The cleaning sequence is initiated by a timer setting or alternatively triggered by differential pressure. Standard cleaning cycle trigger is set to 60 minutes. During the pre-flushing phase, the flushing valve opens and particularly larger particles are flushed out.
Filtration
